The TGAS-1031-G fixed-mounted explosion-proof gas forecast is high-end and intelligent. On-premises display, with remote control for installation, calibration
Category: Fixed Flame, Gas detector
Fixed flame and gas detector are usually fixed in the field, and the warning signal is transmitted to the control center. Then will form a complete measuring system. The task of the system is to protect equipment in that area and give early warning of possible gas and fire hazards.
A fixed flame is a device that detects flames from tens to hundreds of meters away. The device uses the principle of infrared IR, and/or ultraviolet UV to detect the presence of a flame. In some configurations, the detector is also integrated with a Camera to have a visual image of the monitored area. The remote fire alarm system is quite expensive, so it is mainly applied in important fields such as marine, oil and gas, important industrial plants.
The fixed gas detector is a device that measures gases fixed at a location. Therefore, the detection range is limited and only a single gas can be measured. When you want to monitor many different gases, you must equip many probes.
Classification of gas and fire detectors:
Gas detector
By gas type: The user selects the type of gas to be monitored. Toxic Gas Detector, Combustible Gas Detector, or Oxygen Detector…
According to configuration: With or without screen. RS485 output, or 4~20mA…
According to the area of use: Safe (Safe-zone) or dangerous (Hazard zone), Zone 0, Zone 1 or Zone 2 levels…
Fixed flame gas detector
Based on the principle: IR infrared detector, UV ultraviolet detector or a combination
Based on configuration: Single-flame detector, multi-flame detector, explosion-proof fire detector…
Remote Gas Detector, Model SafEye, Spectrex US
Crowcon TXgard-IS+ gas detector, Explosion-proof fixed detector
TXgard-IS+ is an Intrinsically Safe (I.S.) explosion-level gas probe that detects toxic gas and oxygen concentrations, which have an LCD display.
Crowcon Xgard Fixed Ex/Toxic/Oxygen Gas Detector
Crowcon Xgard gas detector consisting of various measuring ranges is a fixed gas probe selection suitable for a variety of requirements with gas detection
Crowcon Xsafe Fixed Gas detector, for Safe Zone
Crowcon Xgard Bright Fixed Mounting Toxic Gas detector
Crowcon IREX Infrared Fixed Gas detector
Crowcon IREX is an infrared gas detector with full features, fast response time, which gives an mV output via wheatstone bridge,…