GasAlertMax XT II, LEL/O2/CO/H2S Gas detector, with pump

GasAlertMax XT II simultaneously measures 4 gases, with integrated sample pump

GasAlertMax XT II gas detector can measure the following gases simultaneously:

• H2S – hydrogen sulfide
• CO – carbon monoxide
• O2 – oxygen
• LEL combustibles
• Integrated explosive pump inside the machine for measurement in confined spaces, tanks, …

Popular Goods Code: XT-XWHM-Y-OE, XT-XWHM-Y-NA, XT-XWHM-Y-UK

Description GasAlertMax XT II

GasAlertMax XT II Gas detector, with pump is a series of portable gas detectors that can simultaneously measure 4 types of CO, H2S, O2 and explosive gas according to %LEL. Compact when used at the scene, the GasAlertMax XT II gas detector is integrated with an internal sampling pump. Designed for stable, reliable and easy-to-use operation. SmartSample enhances remote sampling for the most accurate results.

Simple to use interface with just 1 button, easy to use when using gloves, users can change the options to suit the specific use. Confined space can be purchased for the convenience of off-field use or an additional MicroDock II set for automatic machine calibration and inspection.

Features GasAlertMax XT II, LEL/O2/CO/H2S Gas detector, with pump

• Easy-to-read, multilingual LCD monitor, can simultaneously display 4 gases (H2S, CO, O2 and explosive gases)
• Vibration, light and whistle alarms
• Sample suction pump integrated inside the machine (This technology only G7 has)
• Low, High, TWA and STEL alarms
• The smart, simple icons on the LCD make it easy to recognize notifications and alarms
• GasAlertMax XT II, LEL/O2/CO/H2S Gas detector, with pump equipped with impact-resistant casing
• Simple auto-calibration
• The rechargeable battery is extremely strong, durable, allowing for continuous gas measurement within 13 hours. waiting time of about 6 months
• Pump detection with in-machine-mounted semiconductor pressure sensor
• Simple-to-use interface with a single button
• Easy to use via simple guide
• Optional english, French, German, Spanish and Portuguese languages
• Suitable for MicroDock II calibration equipment using automatic calibration

Included on delivery:

• Body with optional sensors(s), belt buttons and shockproof case
• Rechargeable Battery
• Charging
• 3 ft./1 m calibration tube
• 10 ft./3 m sampled straws with quick connector to the machine
• However screw open the sensor cover
• Set of 5 pump filters
• Manual
• Multilingual guide CD address

GasAlertMax XT II Specifications

Gas	H2S	Co.	O2	LEL (combustible)
Measuring Range	0 – 200 ppm (1 ppm increments)	0 – 1000 ppm (1 ppm increments)	0 – 30.0% vol. (0.1% vol. increments)	0 – 100% LEL (1% LEL increments) or 0 – 5.0% v/v methane

Instrument dimensions	13.1 x 7.0 x 5.2 cm (5.1 x 2.8 x 2.0 in.)
Weight	300 g (10.6 oz.)
Operating temperature	-20°C to +50°C (-4°F to +122°F)
Storage temperature	-40°C to +60°C (-40°F to +140°F)
Operating humidity	10% to 100% relative humidity (non-condensing)
Dust and moisture ingress	IP666/67
Alarm setpoints	May vary by region and are user-defined
O2 measuring principle	Capillary controlled concentration sensor
Alarm conditions	TWA alarm, STEL alarm, low alarm, high alarm, multi-gas alarm, over limit (OL) alarm, low battery alarm, confidence beep, automatic deactivation alarm, pump alarm
Audible alarm	95 dB+ at 30 cm variable pulsed beeper with full battery charge
Visual alarm	Red light-emitting diodes (LEDs)
Display	Alphanumeric liquid crystal display (LCD)
Backlight	Activates upon startup and when the pushbutton is pressed; deactivates after 10 seconds. Activates during an alarm condition and remains lit until alarm ceases
Self-test	Initiated during activation, self-test runs continuously while detector is operational
Calibration	Automatic zero and automatic span
User field options	Startup message, lockout on self-test error, safe mode, confidence beep, latching alarm, force calibration, cal IR lock, force bump, location logging, force block test, set datalog interval, set confidence interval, language selection.
Sensor Options	Sensor enable/disable, set span concentration values, set calibration interval, set bump interval, set alarm setpoints, set STEL interval, set TWA period, auto zero at startup enable/disable, 5% overspan, low alarm acknowledge, oxygen measurement, and combustible gas measurement

See more information on the manufacturer’s website here

Image of GasAlertMax XT II

• 

• 

Videos GasAlertMax XT II

Bonus Videos detailed tutorial A to Z