MultiRAE PGM-6228 Gas detector, multi-target gas measurement

Common MultiRAE CODE PGM-6228

The MultiRAE PGM-6228 Gas detector is one of the most advanced chemical detection machines on the market. With dynamic customization that selects 6 different gases simultaneously along with wireless connectivity, this multi-gas detector is versatile and has a variety of customizations, while providing real-time access to alerts and alarms from any location. Optionally 6/25 sensors including LEL, PID, NDIR, and electrolysmization can be easily changed off-field. The MultiRAE Gas detector provides important information for the rapid response to incidents by 5 alarm types, including Man-down and wireless connection to your control center.

MultiRAE PGM-6228 Gas detector Features:

• Wireless integration options
• 25 alternative sensor options for a variety of fields, including PID, NDIR, and toxins such as ammonia, chlorine and formaldehyde
• Five types of near and far alarms, including Man-down
• Dustproof and Waterproof (IP65-rated)
• Sturdy design
• Gas library includes 190 VOCs and 55 flammable gases
• Longest battery life compared to machines of the same type
• Intuitive interface, easy-to-understand icons
• Flipable display
• Large buttons for easy navigation even with 3-layer gloves
• Continuous data recording – six months x 5 sensors x 24/7
• Automatic inspection and automatic calibration with AutoRAE 2

MultiRAE PGM-6228 Gas detector Application:

• Laboratory
• Confined space
• Emergency – Emergency Rescue
• Environment
• Cleanup / Remediation
• probe
• Fracking
• Hazard Response
• Plant Stop/Maintenance
• Urban search and rescue
• Protect a place

STANDARD CONFIGURATION:

• MultiRAE Gas detector with selected sensor, battery, wireless card if selected, sheath, filter, belt clamp
• Data recording device
• Carryable Charging/Computer Connection Cable
• Power Changeer
• Calibration cap
• Alkaline Battery Installer
• 6-edge lock
• PID Sensor Opener
• 3 pieces of backup filter
• 6 inch probe
• Quick guide
• Included document CDs
• ProRAE Studio II blanket section using device configuration and data management
• Calibration Certificate
• Warranty card
• Moving suitcase (if booked)

ATTENTION WHEN ORDERING:

• NDIR percent Vol combustible sensor must be accompanied by the catalytic LEL sensor
• ClO2 and H2S sensors cannot be installed in the same instrument
• NO and NH3 sensors cannot be installed in the same instrument

SENSOR SPECIFICATIONS

PID Sensor	Range	Resolution
VOC 10.6 eV (HR)	0 to 5,000 ppm	0.1 ppm
Combustible Sensors	Range	Resolution
Catalytic LEL	0 to 100% LEL	1% LEL
NDIR (0-100% LEL Methane)	0 to 100% LEL	1% LEL
NDIR (0-100% Vol. Methane)	0 to 100% Vol.	0.1% Vol.
Carbon Dioxide CO2 NDIR Sensor	Range	Resolution
CO2 NDIR HR Carbon Dioxide (CO2) NDIR Sensor	0 to 50,000 ppm	100 ppm
Electrochemical Sensors	Range	Resolution
Ammonia (NH3)	0 to 100 ppm	1 ppm
Carbon Monoxide (CO)	0 to 500 ppm	1 ppm
Carbon Monoxide (CO), Ext Range	0 to 2,000 ppm	10 ppm
Carbon Monoxide (CO), H2-comp.	0 to 2,000 ppm	10 ppm
Carbon Monoxide (CO) Hydrogen Sulfide (H2S) – Combo	0 to 500 ppm 0 to 200 ppm	1 ppm 0.1 ppm
Chlorine (Cl2)	0 to 50 ppm	0.1 ppm
Chlorine Dioxide (ClO2)	0 to 1 ppm	0.03 ppm
Ethylene Oxide (EtO-A)	0 to 100 ppm	0.5 ppm
Ethylene Oxide (EtO-B)	0 to 10 ppm	0.1 ppm
Formaldehyde (HCHO)	0 to 10 ppm	0.01 ppm
Hydrogen Cyanide (HCN)	0 to 50 ppm	0.5 ppm
Hydrogen Sulfide (H2S)	0 to 100 ppm	0.1 ppm
Methyl Mercaptan (CH3-SH)	0 to 10 ppm	0.1 ppm
Nitric Oxide (NO)	0 to 250 ppm	0.5 ppm
Nitrogen Dioxide (NO2)	0 to 20 ppm	0.1 ppm
Oxygen (O2)	0 to 30% Vol.	0.1%Vol.
Phosphine (PH3)	0 to 20 ppm	0.1 ppm
Sulfur Dioxide (SO2)	0 to 20 ppm	0.1 ppm